Approved to EN60335-2-96 as required by the 17th Edition Wiring Regulations (BS7671:2008)
Two heat outputs - 150W/m2 and 200W/m2
Quick installation - Simply roll out the mat & fix to the floor
Suitable for tile, stone, slate and marble floor finishes
Continuous metallic earth screen to ensure electrical safety
Low build height - Minimal floor height build up
Suitable for use in wet areas
EMC Safe
|
Max Power Loading - 150W/m2 or 200W/m2
Diameter - 3.0mm - 4.0mm
230V supply
Twin conductor heating cable with single
3m “cold tail” connection lead
|
